The term “Single Shot” signifies a single pulse output of some duration. Single Shot on Make: Power must be applied to the input voltage terminals continuously. Upon closure of a Normally Open (N.O.) external initiate switch, the load is instantaneously energized and the time delay cycle starts. Maintained closure or actuation of the external initiate switch during the delay cycle will not affect the time delay period. When the delay period expires, the timer will reset to its original position and is ready for another cycle. Single Shot on Break: Power must be applied to the input voltage terminals continuously. Upon closing and opening an external initiate switch, the load is instantaneously energized and the time delay cycle starts. When the delay period expires, the timer will reset to its original position and is ready for another cycle.
MC
Single Shot Relay Output Microcontroller Counter Timer
- Coin-counting timer
- Counts 1 to 15 coins and .5 to 7.5 minutes
- Microprocessor-controlled
- 15 to 20 amp relay output
TGP
Single Shot Relay Timer
- Compact 2" x 2" configuration
- Relay outputs from 10 to 30 amps
- Cost-effective alternative to plug-in relay
- Factory-fixed or variable timing
TGPB
Single Shot Relay Timer
- Compact 2" x 2" configuration
- Relay outputs from 10 to 20 amps
- Dry initiate switch and non-isolated contact
- Factory-fixed or variable timing
TGPL
Single Shot Relay Timer
- Compact 2" x 2" configuration
- Relay outputs from 10 to 30 amps
- Hot initiate switch and isolated contact
- Factory-fixed or variable timing
TGPLB
Single Shot Relay Timer
- Compact 2" x 2" configuration
- Relay outputs from 10 to 20 amps
- Hot initiate switch and non-isolated contact
- Factory-fixed or variable timing
TGPS
Single Shot Relay Timer
- Compact 2" x 2" configuration
- 10 amp relay output
- Initiate switch closes and opens to start timing function
- Factory-fixed or variable timing
TGPSB
Single Shot Relay Timer
- Compact 2" x 2" configuration
- 10 amp relay output
- Dry initiate switch and non-isolated contact
- Factory-fixed or variable timing
TGPSL
Single Shot Relay Timer
- Compact 2" x 2" configuration
- 10 amp relay output
- Hot initiate switch and isolated contacts
- Factory-fixed or variable timing
TGPSLB
Single Shot Relay Timer
- Compact 2" x 2" configuration
- 10 amp relay output
- Hot initiate switch and non-isolated contacts
- Factory-fixed or variable timing
TH3P
Single Shot Solid State Timer
- Compact 2" x 2" configuration
- Solid state 1 amp output
- Dry initiate switch
- Factory-fixed or variable timing
TH3PL
Single Shot Solid State Timer
- Compact 2" x 2" configuration
- Solid state 1 amp output
- Hot initiate switch
- Factory-fixed or variable timing
TNP
Single Shot Plug-in Relay Timer Dry Initiate
- 8-pin or 11-pin Plug-in timer
- Easy install; excellent field replacement timer
- Sealed relays
- Factory-fixed or variable timing
TNPL
Single Shot Plug-in Relay Timer Hot Initiate
- 8-pin or 11-pin Plug-in timer
- Easy install; excellent field replacement timer
- Hot initiate switch
- Factory-fixed or variable timing
TH3XP
Single Shot Solid State Timer, High Power
- Digital timing, solid state output
- 10 Amp continuous current handling
- 60 Amp AC single-cycle surge handling
- Factory fixed, variable or external timing adjustment
TH3XPL
Single Shot Solid State Timer, High Power
- Digital timing, solid state output
- 10 Amp continuous current handling
- 60 Amp AC single-cycle surge handling
- Factory fixed, variable or external timing adjustment
2747 Route 20 East
Our email: info@pelcocaz.com
Our phone: 800 321 9539
Our fax: 315 655 3862
Complete Specs PDF
